![]() ![]() We will use Docker auto-generated networks in this example. 1 host address), these masks are not applicable in this case. ![]() However, since Docker also connects the host to the network (with. Typically, networks with 2 nodes connected use /31 or /30 masks. We have 4 docker containers connected with two docker networks. Let’s take an example of the following topology:įirstly, let’s break down what we see in the picture. A full-mesh topology is changed to a star topology. This peer will, in turn, forward it to all other peers. This approach allows one IBGP to act as a route-reflector and all IBGP peers will send routing information only to that peer. The design of a method known as “ route reflection“ was introduced, to alleviate the need for “full mesh” peering. This operation often represents a serious scaling problem. This way, external routing information can be re-distributed to all other routers within that autonomous system. To prevent loops, all BGP speakers within a single autonomous system must be fully meshed. “don’t forward routing information received from one IBGP peer to another IBGP peer” Since the Internal BGP (IBGP) peers must follow the rule: The Border Gateway Protocol (BGP) is a routing protocol, designed for TCP/IP internets. We are using OpenDaylight-BGP plugin for this demonstration. The main goal of this project is to create a Docker container, that can be connected to an existing network and provide route-reflector functionality.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |